From: Rizqi Angga Kurniawan
Bismillahirrohmanirrohim,
Maha besar ALLAH SWT yang menciptakan dan menguasai seluruh jagad raya ini. Dalam e-mail ini saya hanya ingin coba menganalisa keaslian dari file audio tipe mp.3 (AlamKubur) yang dikirimkan oleh senior saya mbak Retno E (dia juga dapat dari temennya). Analisa ini bukannya saya gak percaya dengan adanya alam kubur, tapi penyusupan dan penyelewengan akidah Islam terkadang sering dilakukan oleh pihak-pihak yang kurang senang terhadap Indahnya ISLAM dan menjadikan sesuatu hal bersifat Bid’ah di dalam agama kita yang mulia ini. Dan thanks buat mbak Retno E buat izinnya.
Step analisanya sebagai berikut :
1. Dalam analisa ini saya menggunakan software Cool Edit Pro versi 2
2. coba scan dan disini terlihat untuk grafik suaranya (left and right)
3. Untuk mengetahui file ini kapan terekam saya coba menggunakan fitur wave properties
4. Disini terlihat pada tanggal (last written) tertera tanggal 08 Agustus 2005 jam 14.26.42 telah mengalami proses pengeditan, jadi mungkin sebelum dikirim ke mbak Retno, file ini sudah mengalami proses edit.
Background (suara teriakan wanita 2), spliter 3
Background (suara teriakan wanita 1), spliter 2
File gabungan (mp3) yang dikirimkan via e-mail Suara utama (terdengar teriakan suara laki-laki), spliter 1
5. Kemudian berdasarkan petunjuk yang ada dalam menu technical support (di dalam software ini) untuk mengetahui originalitas (keaslian) dari suatu file suara dapat menggunakan fitur frecuency band spliter, ternyata file ini (AlamKubur.mp3) adalah hasil dari gabungan beberapa layer (tumpukan/gabungan) suara,… yang maksudnya adalah hasil dari beberapa file suara dan file background suara yang digabungkan menjadi satu, cara ini mungkin lebih familiar dengan istilah mixing dalam dunia rekaman. Seharusnya bila suatu file suara bersifat original (Insya Allah) file itu tidak dapat di spliter (dipisahkan), meskipun bisa di spliter hasilnya terdengar jelek dan kurang bagus di dengar, tapi file AlamKubur ini bisa di spliter dan suaranya sangat jelas dalam tiap file spliternya.
Wallahu’alam Bisahwab (hanya Allah SWT yang tahu).
Sebuah ‘Tanggapan’ Tentang Ditemukannya Neraka di Dalam Perut Bumi
Home Improvement
Home Improvement is a quality home improvement resource. Our collection of home improvement tips and articles include articles on kitchens, bathrooms, living rooms, outdoors, decks and patios, and bedrooms. The list of home improvement articles are set up to be easy to find and easy to read.
Outdoor Lighting Installation
Outdoor lighting is not only a beautiful addition for your backyard but functional. For enhancing landscaping, you can install lighting that is low voltage to provide illumination. Other benefits of outdoor lighting include safety, and overall ambience. Low voltage kits are sold at many hardware and home improvement stores and come with a built-in transformer that has a timer. This feature allows you to choose when to have the lights turn on and off, adding convenience.
The transformers are able to use a household 120-volt and make it safe to run 12 volts. To install low lighting for your outdoors, a GFCI receptacle will be required on the exterior of your home. If you do not presently have on, an electrician will need to install one. Most importantly, always contact your local gas and electric company before you start to dig to ensure there are no underground cables or pipes.
For installation, choose the type of lights you prefer and keep in mind the areas you want to illuminate. Generally, you will find lights in four or seven watt so if you plan to brighten a large area you may need more lights than expected. Make sure the transformer has adequate wattage where additional lights could be added in the future. Be sure you have a diagram from which to work, which will help you stay on track of where you want the lighting to be installed. In addition, make good notes so you are reminded of problem areas, or specifics as to what you want to be illuminated. For example, you may have numerous types of plants and flowers on the south side of the house but in particular, you want your prized roses to shine.
After you have purchased the correct number of lights, position them to coordinate with your diagram. Typically, lights will come with a stake that can be driven into soft dirt easily. For this reason, the evening before you do the installation, water the ground thoroughly and then the morning of, sprinkle it with water so the ground is soft. Lay the lights down where the will be installed and then starting at the GFCI receptacle, lay out the cable so it runs to where the lights have been laid out. The cable above ground will be buried so no need to worry about anything being unsightly. Make sure you leave enough excessive cable at the transformer for each of the lights, which will allow you to move your lights later on. Each light has two wires with a metal tip. By putting one tab on each side of the cable and snapping it together, the light is installed. When the tip is pierced into the cable, the electrical connection is created. If the light does not come on, make sure these tabs are secured together.
You will then separate the wires at the end of the electrical cable and strip ½-inch of insulation. The two screws on the transformer will be loosened and the bare wires you just stripped slid under the correct terminal. Once complete, plug in the transformer, and turn it on. Look at each light to ensure it is working. Keep in mind that if the day is bright and sunny, it may be difficult to tell if they are on so you may need to shield the light from the sun or recheck when it starts to get dark. With a small shovel, you need to dig down 5 inches to bury the cable. Once the cable is buried, cover it with dirt and compact it down. Finally, set the timer to come on, go off at the desired time, and enjoy new lights form this home improvement.
A Smart Trick for Attracting Higher Paying AdSense Ads
by: Diane Nassy
There are no guarantees in life, so I don’t guarantee that following these tips will bring you more money every time. However, I do guarantee that they will greatly increase your chances of pulling more of the top-paying AdSense ads to your site than if you don’t follow these suggestions.
Enough with the disclaimers, let’s get down to the business of making money. Google lets advertisers bid anywhere from a minimum of .05 per click right up to a whopping $100. It should be pretty obvious that you’re not going to get rich running .05 cent ads on your site, but getting a few $100 ads, or even some $10, $20, or $30 ads can’t be a bad thing, right?
Now the problem is, Google is pretty closed-mouthed about who is paying what for their ads, and there is no real way to determine which words pay the most per AdSense click.
But ah, far away in a parallel universe we find another Pay-Per-Click provider called Overture. It seems that Overture is less sensitive about releasing their top-priced words and anyone who cares to find out what web sites are paying for words and phrases can do so by simply using Overtures tattle-tale special pricing tool (http://www.pixelfast.com/overture/). And it couldn’t be easier to use. You simply type in a key word or phrase and the tool returns a list of advertisers using that word and how much they are paying. It even shows you the actual ad.
Oh what a treasure trove of wealth-grabbing results this can be if you know what can be done with that priceless information.
Consider this possibility
Any key word or phrase that’s worth big bucks on Overture is probably worth big bucks on Google as well, maybe even more, right? So try this experiment:
Enter the phrase “SEO Services” without the quotes in the Overture tool (http://www.pixelfast.com/overture/). When I entered that phrase on the day I wrote this article, I was found a company called SEO Inc. that was willing to pay $8.01 per click, followed by SEO Advantage at $8.00, and Online Web Consultants at $6.50. Other bidders appeared below them in the $3.00 range straight on down to some who wouldn’t pay more than a dime per click.
Now, if a company is willing to pay that much money for a click on Overture, it is probably willing to pay that or more on Google. Even if that particular company isn’t advertising on Google, you can be pretty sure that the same key phrase is drawing near the same bid price from other companies who do advertise on Google. So what that means is there is no way that you can possibly afford NOT to have some web pages posted somewhere that are targeted to those sweet-paying words.
All you have to do is use Overture’s pricing tool to find the highest-paying key words that are related to your site and then optimize those words to start pulling similar ads. If all goes to plan, you can perhaps double, triple, or even quadruple your AdSense revenue without needing any increase in traffic or click-through rate.
About the author:
Diane provides marketing and internet profit tips.
For more Google AdSense tips, visit http://www.adsense.deeljeabiz.comEmail : deeljeabiz@gmail.com
